Get Buildroot
Root filesystem pre-built images
The root filesystem images arejffs2 or ubi filesystem images containing an entire embedded Linux system. These filesystems are read/write capable and are designed to be stored in NAND FLASH memory available on AT91SAM EK boards.
The root filesystem image depends on instruction set i.e. the one for Cortex-A will not work on ARM926 based devices.
|
|||||||||||
The version number indicates the official version of Buildroot on top of which at91 patches has been pushed.
If you have chosen this way to get Buildroot images, you can skip the building part and go directly to BuildRootUse. r14 - 30 Oct 2013 - 05:22:01 - JoshWu
Linux4SAMLinux4SAM
Open source solutions ApplicationsBoards
- SAMA7D65 Curiosity
- SAM9X75 Curiosity
- SAMA5D29 Curiosity
- SAM9X60 Curiosity
- SAMA7G5-EK
- SAMA5D2-ICP
- SAMA5D27 WLSOM1 EK
- SAM9X60-EK
- SAMA5D27 SOM1 EK
- SAMA5D2 PTC EK
- SAMA5D2 Xplained
- SAMA5D3 Xplained
- SAMA5D4 Xplained
- Older boards
FAQ
Useful links
- Microchip Microprocessors forums
- AT91 Community (archive)
- Microchip
- Linux4Microchip on GitHub
- Linux4SAM on GitHub
NAVIGATION
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Microchip and others, are registered trademarks or trademarks of Microchip Technology Inc. and its subsidiaries. 
Arm® and others are registered trademarks or trademarks of Arm Limited (or its affiliates). Other terms and product names may be trademarks of others.
Ideas, requests, contributions ? Connect to LinksToCommunities page.